Fluke Versiv Series - Chapter 3 Certify Twisted Pair Cabling; Overview of the DSX Cableanalyzer Modules

69
Chapter 3: Certify Twisted Pair
Cabling
Overview of the DSX CableAnalyzer Modules
WWarningX
Before you use the tester, read the safety
information that starts on page 6.
The Fluke Networks DSX CableAnalyzer
™
modules attach to
Versiv
™
and Versiv 2 main and remote testers to make rugged,
hand-held testers that let you certify, troubleshoot, and
document twisted pair network cabling. The testers includes
these features:
The modules include these features:
 DSX-8000 modules certify twisted pair cabling to Cat 8/Class I/
II limits (2000 MHz) in less than 16 seconds.
 DSX-5000 CableAnalyzer modules certify twisted pair cabling
to Cat 7
A
/Class F
A
limits (1000 MHz) in less than 6 seconds.
 Gives a PASS or FAIL result based on a test limit that you
specify.
 AxTalk software, which is available on the Fluke Networks
website, lets you do tests for alien crosstalk.