515
Chapter 17: Use Projects
Why Use Projects?
The tester’s ProjX
™
management system lets you set up projects
that help you monitor the status of a job and make sure that your
work agrees with the requirements of the job.
You can use a project to do these tasks:
Specify the tests that are necessary for a job.
Specify settings for tests.
Specify an operator for the job.
Make sets of sequential IDs to use as names for test results.
Automatically save test results with IDs from a set.
Add the results from other necessary tests to each saved result
in the project.
See which IDs do not have results for a specified test.
See what percentage of a job is completed.
See how many links passed and how many failed.
Keep the test results from a job in one place for easy access.
When you use a project, you can do tests and use IDs that are not
specified in the project if necessary. You can also easily change
the settings in a project if necessary.
Notes
It is not necessary to install a module to set up a
project for the module. The tester keeps all
settings in the main tester.
To manage projects in the cloud, use the
LinkWare Live web application. See Chapter 18.
To Next Page
Loading...
