Fluke Versiv Series - Step 8: Save the Results; Buttons to Do Tests and Save Results

Chapter 2: Get Started
Buttons to Do Tests and Save Results
61
GPU26.EPS
Figure 19. Examples of the EventMap, TABLE, and TRACE Screens
Step 8: Save the Results
Tap SAVE (or FIX LATER if the test failed). The SAVE RESULTS screen
shows the IDs you entered. You can change the IDs if necessary. Tap
SAVE again to save the results.
Buttons to Do Tests and Save Results
When more than one button shows at the bottom of the screen,
the tester highlights one in yellow to recommend which one to
tap.
Note
To change the Auto Save setting, tap the Next ID
panel on the home screen.