Fluke Versiv Series - The Home Screen for Certifiber Pro Modules

Chapter 9: Certify Fiber Cabling
The Home Screen for CertiFiber Pro Modules
241
The Home Screen for CertiFiber Pro Modules
The home screen (Figure 105) shows important test settings.
Before you do a test, make sure these settings are correct.
GPU117.EPS
Figure 105. The Home Screen for CertiFiber Pro Modules
 PROJECT: The project contains the settings for a job and helps
you monitor the status of a job. When you save test results, the
tester puts them in the project. Tap the PROJECT panel to edit
the project settings, select a different project, or make a new
project.
F
IH
A
D
B
E
K
J
C
L
MN
G
O