Fluke Versiv Series - For DSX Modules and Twisted Pair Adapters

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
8
WCaution
To prevent damage to the tester or cables under
test and to prevent data loss:
 To prevent unreliable test results, connect the ac
adapter or recharge the battery as soon as the low
battery indication appears.
 Keep modules attached to the testers to give
protection to the module connectors.
 Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.
 You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive or that
you upload results to LinkWare Live.
For DSX Modules and Twisted Pair Adapters
WWarningX
To prevent possible fire, electric shock, or personal
injury:
 Do not connect the tester to telephony inputs,
systems, or equipment, including ISDN inputs.
Doing so is a misapplication of this product, which
can cause damage to the tester and make a possible
shock hazard for the user.
 Always turn on the tester before you connect it to a
link. Doing so activates the tester’s input protection
circuitry.