Chapter 18: Sync Projects with LinkWare
™
Live
Use LinkWare Live Through a Wi-Fi Network
559
5 On the LWL SIGN IN screen, if necessary, enter the ID and
password for your LinkWare Live account, then tap SIGN IN.
6 If you use other people’s LinkWare Live accounts, the
ORGANIZATION screen shows. Tap the organization you want
to use.
7 On the SYNC PROJECTS screen (Figure 206 on page 561),
select the projects you want to sync, then tap SYNC.
Use LinkWare Live Through a Wi-Fi Network
Note
The testers in some custom kits do not support
Wi-Fi (for example, in some kits purchased for
government applications). These testers do not
show any Wi-Fi settings.
Versiv 2 testers have an internal Wi-Fi radio. These testers do not
need an external adapter to connect to Wi-Fi networks.
To connect a Versiv tester to a Wi-Fi network, you must have an
optional USB Wi-Fi adapter. Fluke Networks recommends these
adapters:
Versiv 2 testers have an internal Wi-Fi radio. These testers do not
need an external adapter to connect to Wi-Fi networks.
TP-LINK TL-WN725N, versions 1 and 2 (recommended)
NETGEAR WNA1000M
Other adapters may be suitable. For the latest list of qualified
adapters, see this topic in the Fluke Networks Knowledge Base:
www.bit.ly/1ACJeFO
To Next Page
Loading...
