Versiv Series Cabling Certification Product Family
Technical Reference Handbook
382
SmartLoop Results
The tester shows the SmartLoop results on two sets of EventMap,
TABLE, and TRACE screens, one for each fiber in the link. See
Figure 156.
GPU172.EPS
Figure 156. EventMap from a SmartLoop Test
The purple fiber is the loopback cord.
Note
In saved SmartLoop results, the loopback cord is gray.
The fiber between the launch cord and the loopback cord is
the fiber on one side of the link.
Fiber A is the side of the link connected to the OTDR at End 1.
To Next Page
Loading...
