Chapter 16: Manage Test Results
Upload Results to a PC
511
Export: On the EXPORT RESULTS screen, select New or All,
select the project that contains the results you want to
export to the flash drive, then tap EXPORT.
New: Export only results that do not have the same IDs as
results that are already on the flash drive.
All: Export all results from the projects you select.
Note
Cable IDs are case-sensitive. For example, the
tester saves result with the names “A0” and “a0”
in two different records.
Import: On the IMPORT RESULTS screen select the project
that contains the results you want to import from the
flash drive, then tap IMPORT.
Delete: On the DELETE RESULTS screen select the project
that contains the results you want to delete on the flash
drive, then tap DELETE.
Upload Results to a PC
Note
To upload results to the cloud for transfer to a PC,
use the LinkWare Live web application. See
Chapter 18.
To upload results to a PC from the tester or a flash drive, use
LinkWare PC software.
1 Install the latest version of LinkWare PC software on the PC.
2 Turn on the tester and start LinkWare PC on the PC.
3 Use the USB cable supplied to connect the Micro USB port on
the tester to a type A USB port on the PC. See Figure 195.
4 Or connect a USB flash drive to the PC.
-continued-
To Next Page
Loading...
