Fluke Versiv Series - Step 6: Save the Results

Chapter 2: Get Started
Tutorial: Certify Twisted Pair Cabling
41
 WIRE MAP: Shows the connections between the ends of the
cable.
 PERFORMANCE: Shows the overall result for each test. Use
this screen to quickly see which test failed.
 Plot and tabular results screens: Tap a test on the
PERFORMANCE screen to see a table or plot of the results.
 If you set HDTDR/HDTDX to All Autotests, you can see the
analyzers’ results on the DIAGNOSTIC tab.
If the test failed, the FAULT INFO tab shows information to help
you identify and locate the fault.
Step 6: Save the Results
6-1 Tap SAVE (if the result was PASS) or FIX LATER (if the result
was FAIL).
6-2 On the SAVE RESULT screen, tap the Cable ID box, use the
keyboard to enter an ID for the results, then tap DONE.
6-3 Tap SAVE.