Fluke Versiv Series - Clean the Tester; Clean the FI-1000 Video Probe

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
586
Clean the Tester
To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with water or water and a mild detergent.
To clean the case, use a soft cloth that is moist with water or
water and a mild detergent.
WWarningX
Do not put the tester or the battery pack in water.
WCaution
To prevent damage to the touchscreen or the case,
do not use solvents or abrasive materials.
When you clean the touchscreen or the case, do not
let liquid get under the plastic around the
touchscreen.
To clean the optical connectors on a fiber module, see the
instructions in Chapter 7.
Clean the FI-1000 Video Probe
To clean the case, use a soft cloth that is moist with a mild
detergent.
WCaution
To prevent damage to the case, do not use solvents
or abrasive materials.
To clean the lens, remove the adapter tip, then wipe the lens with
an optical-grade cloth that is moist with an optical-grade cleaning
solution.