Versiv Series Cabling Certification Product Family
Technical Reference Handbook
114
GPU104.EPS
Figure 45. Tabular Results Screen for a Frequency-Domain Test
The location where the tester made the measurements. To
switch between results for the main and remote, tap REMOTE
or MAIN (
).
The results are for the wire pair or pairs shown. To see the results
for a different pair or pairs, tap a tab on the right side of the
screen (
).
WORST MARGIN is the measurement that is nearest to the limit
line or exceeds the limit by the largest amount. WORST VALUE is
the worst measurement.
To Next Page
Loading...
