Versiv Series Cabling Certification Product Family
Technical Reference Handbook
236
: Power button. Versiv 2: The LED in the power button shows
the status of the battery charging process. See Table 2 on
page 18.
: Press to go to the home screen.
Connector for the AC adapter. Versiv: The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge the
Battery” on page 18.
RJ45 connector: Lets you connect to a network for access to Fluke
Networks cloud services.
Refer to Figure 103:
PASS LED comes on when a test passes.
TEST LED flashes during a test and when you manually turn on
one of the output ports (
).
FAIL LED comes on when a test fails.
TALK LED comes on when the talk function is on. The LED
flashes until the main tester accepts the request to talk. See
“How to Use the Talk Function” on page 293.
TONE LED flashes if you press when a main tester is not
connected to the remote or is in Far End Source mode.
LOW BATTERY LED comes on when the battery is low.
The LEDs also have these functions:
Battery gauge (see Figure 3 on page 20)
Volume indicator for the TALK function
Progress indicator for software updates
Decal with laser safety
information.
To Next Page
Loading...
