Fluke Versiv Series - How to Control the Light Source

Chapter 9: Certify Fiber Cabling
Autotest in Far End Source Mode
283
GPU132.EPS
Figure 120. Connections for Far End Source Mode
(1 Jumper Reference, Multimode Fiber)
EF-TRC*
EF-TRC*
EF-TRC*
WCaution
Do not disconnect the
output ( ) after you set
the reference.
When you use the EF-TRCs,
DO NOT use other
mandrels.
Fiber
Test
reference
cord
*Use the EF-TRCs only with multimode modules.
Fiber Test
Reference
TRC Verification