Chapter 2: Get Started
Buttons to Do Tests and Save Results
63
When you look at a saved result that failed, tap TEST AGAIN to
do the test again for the same ID and with the same test settings
as the saved result.
Note
The color of the FIX LATER and TEST AGAIN
buttons (yellow or gray) depends on which button
you tapped the last time you did a test that failed.
TEST (yellow): This button shows if the test passed and Auto
Save is on. When Auto Save is on, the tester saves results with
the next available ID when the test is completed. When you tap
TEST, the tester does a test for the next available ID.
: The key does the same function as the TEST button.
When TEST AGAIN shows, you can press to do a test on
the next ID.
To Next Page
Loading...
