Fronius TPS/i Robotics PushPull CMT User Manual

129
EN
Replacing the
TPSi wire buffer
wire guide
1 2
3 4
NOTE! Before starting work, thread the wire electrode out of the wire buffer.
IMPORTANT! If using a wire electrode with a diameter of 1.6 mm (1/16 in.), fit the "original
equipment kit 1.6 mm (1/16 in.)" to the sliding contact and wire guide in the wire buffer.
1
2
3 4

Fronius TPS/i Robotics PushPull CMT Specifications

General

Brand	Fronius
Model	TPS/i Robotics PushPull CMT
Category	Welding System
Language	English