Fronius TPS/i Robotics PushPull CMT User Manual

63
EN
3
Mounting the SB
60i R on the wall
1 2
* = Depending on the surface, different fixings are required for fitting the wall bracket.
The installer is responsible for selecting the correct fixings.
1
3
1
2
3
NOTE! Use a balancer for hosepacks longer than 1.75 m. Position the balancer
halfway along the length of the hosepack.

Fronius TPS/i Robotics PushPull CMT Specifications

General

Brand	Fronius
Model	TPS/i Robotics PushPull CMT
Category	Welding System
Language	English