29
EN
Warning notices
on the device
The device is fitted with safety symbols and a rating plate. The safety symbols and rating
plate must not be removed or painted over. The safety symbols warn against operating the
equipment incorrectly, as this may result in serious injury and damage.
e.g.: WF 30i REEL R /2R/G/W
Do not dispose of used devices with domestic waste. Dispose of them accord-
ing to the safety rules.
Welding is dangerous. The following basic requirements must be met to ensure
the equipment is used properly:
- Anyone performing automated welding must be sufficiently qualified
- Suitable protective equipment must be used
- All persons not involved must be kept at a safe distance from the wire-feed
unit and the welding process
Do not use the functions described here until you have thoroughly read and un-
derstood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the
safety rules
40,0006,3035
To Next Page
Loading...
Need help?
General
