Fronius TPS/i Robotics PushPull CMT - Pushpull Hosepack; General; Scope of Supply

35
EN
PushPull hosepack
General The Robacta MHPi RD hosepack is designed for gas-cooled and water-cooled robot appli-
cations. It connects the SplitBox to the wirefeeder.
The length of the hosepack depends on the robot.
The following combinations are available:
- Robacta MHPi RD conventional
- SB500i -> WF 25i Robacta Drive
- SB60i -> WF 60i Robacta Drive CMT
- Robacta MHPi RD PAP
- SB500i -> WF 25i Robacta Drive
- SB500i -> WF 60i Robacta Drive CMT
- SB60i -> WF 60i Robacta Drive CMT
- Robacta MHPi RD conventional with external wirefeeding hose
- SB500i -> WF 25i Robacta Drive
- SB500i -> WF 60i Robacta Drive CMT
Scope of supply
Robacta MHPi RD conventional hosepack Robacta MHPi RD PAP hosepack
Robacta MHPi RD hosepack with external wirefeeding
hose
Not supplied:
- Inner liners
- Inlet nozzles