Fronius TPS/i Robotics PushPull CMT - Interconnecting Hosepack; General Remarks; General

26
Interconnecting hosepack
General remarks
The interconnecting hosepack connects the power source to the wirefeeder. With the TPS/
i welding system the interconnecting hosepack is available in two versions - one split and
one continuous variant.
- 3 / 5 / 10 / 15 m (extension - split variant)
- 4 / 8 m (connection - continuous variant)
General
The interconnecting hosepack connects the power source to the SplitBox SB 60i R.
The interconnecting hosepack is fixed in position on the SplitBox SB 60i R and is available
in the following preconfigured lengths:
- 3 m (extension - split variant)
- 4 / 8 m (connection - continuous variant)