17
1.5 Main Components and Functions
C3 Finisher (optional), C3 Finisher with Booklet Maker (optional), and
Folder Unit CD1 (optional)
No. Name Description
1 Tri-fold Output Tray button
(when Folder Unit CD1 is
installed)
Press this button to open the tri-fold output tray.
2 Hole-punch waste container Collects punch scraps from the puncher. Remove this container
when discarding the scraps.
3 Output tray Outputs are delivered here.
4 Finisher tray Outputs are delivered here.
5 Staple cartridge Contains staples used for side stitching. Remove when replacing the
staples or clearing staple jams.
6 Booklet tray Bound booklets are delivered here.
7 Finisher front door Open this cover to clear paper or staple jams, replace staples, or
discard punch scraps.
8 Booklet staple cartridge Contains staples used for saddle stitching. Remove when replacing
the staples or clearing staple jams.
9 Booklet maker unit Folds paper in half and secures folded items with staples.
10 Tri-fold Output Tray (when
Folder Unit CD1 is installed)
Tri-folded paper is delivered here. Open the tri-fold output tray to
remove it.
11 Folder Unit cover (when Folder
Unit CD1 is installed)
Open this cover to clear paper jams.
To Next Page
Loading...
