Layout Adjustment
115
Copy
3
1 Select [Mixed Size Originals].
2 Select [On].
îš„ Off
Select this option when copying documents are of the same size.
îš„ On
When documents of different sizes are copied, the machine automatically detects the size
of each document.
îš„ Original Orientation
Allows you to specify the orientation of the document so that the machine can identify the
top of the document.
Note •The [Original Orientation] setting is based on the orientation of the first page of a document. Load
the second and subsequent pages of the document based on this setting.
• If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of the
document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
Edge Erase (Erasing Edges and Margin Shadows of the Document)
When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. The Edge Erase
feature allows you to erase such shadows.
Note •For 2-sided originals, the same edge erase amounts are set for the front and back sides.
• If you set [Reduce/Enlarge], the edge erase amounts will be reduced or enlarged in proportion to the
ratio you specified.
• The binding shift specified in [Booklet Creation] will not affect the edge erase amounts.
• If you load an original document on the document glass and select [1 J 2 Sided] in [2 Sided
Copying] to copy a 1-sided document on both sides of paper, the Mirror Side 1 feature is disabled
even when you select [Individual Edges] in [Edge Erase] and then select [Mirror Side 1] in [2 Sided
Original - Side 2]. In such a case, select [2 J 2 Sided] in [2 Sided Copying].
To Next Page
Loading...
Need help?
General
