Fuji Xerox DocuCentre-IV C2263

6 Send from Folder
350
Send from Folder
6
[Link Job Flow Sheet to Folder] Screen
You can change the link between the folder and its job flow sheet.
Note •Linking, delinking, and auto start settings can be also performed when you create a folder.
1 Select a job flow sheet to link to.
Important • Selecting [Save] without selecting a job flow
sheet does not set a link. If the selected job
flow sheet is already linked, the link is
canceled.
Note •Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• You can sort the list in ascending or
descending order by selecting either [Name]
or [Updated].
2 Select [Job Flow Settings].
3 Select [Create/Change Link].
4 Select any option.
 Refresh
Displays the updated information.
 Create
Displays the [Create New Job Flow Sheet] screen.
For more information, refer to "5 Tools" > "Setup" > "Create Job Flow Sheet" > "Create New Job Flow Sheet" in the
Administrator Guide.
 Edit/Delete
Displays the [Details] screen.
For more information, refer to "5 Tools" > "Setup" > "Create Job Flow Sheet" > "Edit/Delete" in the Administrator Guide.