Installing the Tray Attachment on the Finisher-B1
71
Product Overview
2
Installing the Tray Attachment on the Finisher-B1
When delivering A4 or B5 paper to the finisher tray without stapling, install the tray
attachment supplied with the finisher tray if the outputs are not properly stacked up. Doing
so may help the outputs to be stacked more neatly.
1 Remove the tray attachment from the rear of
the finisher tray.
2 Install the tray attachment onto the middle of
the finisher tray as shown in the diagram.
To Next Page
Loading...
