5 Scan
336
Scan
5
Password
You can use this feature to enter the password for a destination server.
Note •This feature is displayed only when [Network Scanning] is selected on the [Services Home] screen.
1 Select [Password].
2 Enter the password using the keyboard displayed on the screen.
For information on how to enter characters, refer to "Entering Text" (P.70).
Meta Data
You can use this feature to change the values of the Document Management Field (DMF) if
they are specified for a selected job template.
Note •This feature is displayed only when [Network Scanning] is selected on the [Services Home] screen.