Output Format
141
Copy
3
Embossed
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
You can specify the size, density, and others of text to be printed with Watermark in the System Administration mode. For
more information, refer to "5 Tools" > "Common Service Settings" > "Watermark" in the Administrator Guide.
Folding (Outputting Bi-Folded)
This feature allows you to fold copies in half, or crease in half.
Important • When the Finisher-B1 is installed, do not remove output copies from the finisher tray until all the
output copies have been delivered.
Note •The supported paper orientation is only . Select the tray whose orientation is set to .
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Folding].
2 Select any option.
Off
Does not fold copies.
Single Fold
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is installed.
Creases copies in half.
To Next Page
Loading...
