3 Copy
80
Copy
3
Operations during Copying
This section describes available operations during copying. The following shows the
reference section for each operation.
Stopping the Copy Job...................................................................................................................................................................80
Changing the Number of Copies.................................................................................................................................................81
Interrupting the Copy Job ............................................................................................................................................................82
Stopping the Copy Job
To cancel a copy job in progress, use the following procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2 Select [Delete].
îš„ If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
123
456
789
0#
C
123
456
789
0#
C