7 Job Flow Sheets
356
Job Flow Sheets
7
Job Flow Procedure
Job flow sheets are categorized into two types according to the target. One type of job flow
sheets targets scanned documents, and the other type targets files stored in folders. This
section describes the first type of job flow sheets, targeting scanned documents.
For information on job flow sheets that target files stored in folders, refer to "Configuring/Starting Job Flow" (P.348).
The following describes the procedure to operate a job flow. Refer to the following section
for each procedure.
Step 1 Opening the [Job Flow Sheets] Screen ...................................................................................................................... 356
Step 2 Selecting a Job Flow Sheet ........................................................................................................................................... 356
Step 3 Confirming/Changing the Job Flow Sheet................................................................................................................ 357
Step 4 Starting the Job Flow Sheet ......................................................................................................................................... 357
To create and register a job flow sheet, use a computer.
Note •To create a job flow sheet, use CentreWare EasyOperator or Device Setup Tool. EasyOperator is
included in the Driver CD Kit provided with the machine. You can download Device Setup Tool from
Fuji Xerox website.
Step 1 Opening the [Job Flow Sheets] Screen
The following describes how to open the [Job Flow Sheets] screen.
1 Press the <Services Home> button.
2 Select [Job Flow Sheets].
Step 2 Selecting a Job Flow Sheet
1
Select a job flow sheet.
For more information on the [Job Flow Sheets] screen, refer to
"Selecting/Changing a Job Flow Sheet" (P.358).
To Next Page
Loading...
Need help?
General
