More Options
229
Fax
4
More Options
This section describes the features you can select on the [More Options] screen. The
following shows the reference section for each feature.
Remote Polling (Retrieving Files from Remote Machines).................................................................................................229
Store for Polling (Storing Files on the Machine that a Remote Machine can Retrieve)..............................................232
On-hook (Confirming Remote Machine Response Prior to Transmission) .....................................................................233
1 Select [Fax/Internet Fax] on the [Services
Home] screen.
2 Select a feature on the [More Options] screen.
Remote Polling (Retrieving Files from Remote Machines)
Remote Polling is a feature that allows your machine to retrieve a file stored in a remote
machine. You are charged for the transmission fee.
This feature is used for Facsimile Information Services.
For information on Facsimile Information Services, refer to "Receiving Faxes" (P.243).
Note •The Remote Polling feature may not be available depending on the remote machine.
• This feature is not available for the Server Fax service.
• When you specify polling in combination with [Delay Start] on the [Fax/Internet Fax Options] screen,
you can retrieve a file at a specified time.
îš„ Remote Polling
You can retrieve a file stored on a remote machine by sending a polling request from your
machine. You can also retrieve files from multiple machines. This is called Multi-Polling.
îš„ Secure Polling (DTMF Method)
You can retrieve a file from a folder on a remote machine by sending a request from your
machine. A folder must be created on the remote machine. If the folder is passcode-
protected, you can retrieve a file confidentially.
Important • You cannot use polling to retrieve files from multiple remote folders simultaneously.
Note •The DTMF method is not available in the IP Fax (SIP).
To Next Page
Loading...
Need help?
General
