2 Product Overview
60
Product Overview
2
Cooling Mode
The machine enters the Cooling mode if its internal temperature rises too high. During this
mode, the following screen is displayed on the touch screen.
This screen disappears when the internal temperature has cooled down. Wait until the
screen disappears.
If the room temperature is high, lower the room temperature because it may take longer
time for the machine to cool down.
Note •You can select [Close] to forcibly close the screen above. However, you cannot operate the machine
because the machine is still in the Cooling mode. Wait until the message "Machine Cooling in
Progress" disappears in the upper left corner of the screen.
Important • During the Cooling mode, the fan inside the machine is working to release heat. Do not open the
front cover or switch off the machine during the mode.
To Next Page
Loading...
