Power Source
53
Product Overview
2
Switching the Power Off
The following describes how to switch the power off.
1 Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator does not blink.
Important • Do not switch the power off in the following situations. If the power is switched off, the processing
data may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
2 Press the power switch to the [ ] position.
Important • Power off processing is performed internally
on the machine for a while after the power is
switched off. Therefore, do not switch the
main power off immediately after switching
the power off.
z
When the Finisher B-1 (optional) is installed.
Important • Power off processing is performed internally on the machine for a while after the power is switched
off. Therefore, do not switch the main power off immediately after switching the power off.
Note •When powering the machine on after it has been switched off, wait 10 seconds after the touch
screen has gone dark.
Switching the Main Power Off
The following describes how to switch the main power off.
Important • Do not switch the main power off while the touch screen displays a screen or the <Energy Saver>
button blinks. Switching off the main power may damage the hard disk and the memory or cause a
machine malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with
the main power on may damage the hard disk and the memory or cause a machine malfunction.
1 Make sure that the power is switched off.
2 Make sure that the touch screen is blank and the <Energy Saver> button does not light up.
To Next Page
Loading...
Need help?
General
