About IP Fax (SIP)
177
Fax
4
• The Starting Rate supported in IP Fax (SIP) is G3.
Direct Fax
You can use the Direct Fax feature to fax documents created with your computer
applications directly in the same manner as printing.
For the Direct Fax feature, refer to "Sending Fax" (P.412).
Forwarding feature registered in job flow sheet
By registering job flow, you can forward documents in stored folder or scanned documents
via IP Fax (SIP).
Registering in the Job Memory
By storing a setting you frequently use in IP Fax (SIP), you can call the setting with a single
button operation.
Feature Comparison with Regular Fax
The feature comparison between the IP Fax (SIP) and the regular fax is as follows:
*1 : Refers to G3 fax machines connected to the public telephone network.
*2 : Available for the Remote Folder and the Relay Broadcast using F code.
*3 : Available for the Remote Folder using fax signal method. Unavailable for DTMF method.
Features
Regular
fax*
1
IP Fax (SIP)
IP Fax (SIP)
only
SIP server
VoIP
Gateway
Redial List O O O O
Relay Broadcast O XXX
Local Name O O O
X*
2
Starting Rate O O O O
Priority Send O O O O
Delay Start O O O O
Cover Page O O O O
Recipient Print Sets O O O O
Remote Folder O
O*
3
O*
3
X*
2
F Code O O O O
Remote Polling O
O*
4
O*
4
O*
4
On-hook O XXX
Manual Send O XXX
Manual Receive O XXX
Direct Fax O O O O
Folder Selector - Service Setup O X X X
Folder Selector Setup O O O O
Output Destination Setup O O O O
O
X
:
:
Available
Not available
To Next Page
Loading...
Need help?
General
