Output Format
147
Copy
3
Important • Always use the document glass when copying. You cannot use the document feeder with this
feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass so that
the whole image can be scanned.
• When the reduced size is specified to copy an ID card, the machine may copy the ID card in a
different orientation from the original orientation depending on the magnification ratio specified.
For information on the copy magnification ratio for ID Card Copy, refer to "5 Tools" > "Common
Service Settings" > "Copy Service Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the
Administrator Guide.
For information on how to specify the orientation of a document, refer to "Original Orientation (Specifying the Orientation
of Loaded Documents)" (P.120).
3 Select [ID Card Copy] on the [Output Format]
screen.
4 Select [On].
îš„ Off
Disables ID card copying.
îš„ On
Enables ID card copying.
To Next Page
Loading...
Need help?
General
