Fuji Xerox DocuCentre-IV C2263

4 Fax
224
Fax
4
Sending to Folder (F Code Method)
1 Select [F Code].
2 Select [On].
3 Select the [F Code] box, and enter an F code using the keyboard or the numeric keypad.
Note •You can enter up to 20 digits for the F code.
4 If necessary, select the [Password] box, and enter a password using the keyboard or the
numeric keypad.
Note •You can enter up to 20 digits for the password.
 Off
The F code transmission is not used.
 On
The F code transmission is used. Enter the F Code.
 F Code
Select the [F Code] box, and enter the F code using the keyboard or the numeric keypad.
Note •You can enter up to 20 digits for the F Code.
 Password
Select the [Password] box, and enter the password using the keyboard or the numeric
keypad. If a password is not set, leave this box blank.
Note •You can enter up to 20 digits for the password.
 Keyboard
You can use the keyboard to enter the F code or the password.
For information on how to enter texts, refer to "Entering Text" (P.70).
5 Specify a destination, and then press the <Start> button.