Broadcast
241
Fax
4
2 Select [+ Add] to perform Multiple Relay Broadcast.
Manual Send (Transmitting with picking up the receiver or on-hook)
1 Select the [More Options] tab to display the [More Options] screen.
2 Pick up the telephone receiver, or select [On-
hook (Manual Send/Receive)].
3 Select [Manual Send] from the drop-down
menu.
4 Use the keyboard displayed on the touch screen to enter numbers in the following format.
Note •You can specify up to 20 locations for relay recipients.
F Code Method
When using the machine as the initiating station for performing Remote Relay Broadcast,
confirm the F code and the password (if necessary) for the primary relay station.
Important • When using the F Code method for Remote Relay Broadcast, the primary relay stations and
secondary relay stations must support our F Code method and the Relay Broadcast feature.
Note •When performing Relay Broadcast with Fuji Xerox manufactured machines that can be used as both
a initiating station and a relay station, we recommend that you use the fax signal method.
1 Select the [Fax/Internet Fax Options] tab to
display the [Fax/Internet Fax Options] screen.
2 Select [F Code].
Primary rely
station telephone
number
Relay
station
ID
Password
Address
number
Facsimile tone
Beep!
Beep!
To Next Page
Loading...
