5 Scan
296
Scan
5
z
User Name
z
Password
îš„ When [SMB (UNC Format)] is selected
The following items appear:
z
Save in
z
User Name
z
Password
For more information on the setting items, refer to "Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)" (P.299).
5 Select [Next].
Note •To return to the previous screen, select the [Back] button.
When [Add from current location] is selected
3 Select an item to set and set if you change a
setting.
Note •[Transfer Protocol] cannot be changed.
For more information on the setting items, refer to "Specifying a
Destination (Specifying a Destination PC Using the Screen
Keyboard)" (P.299).
4 Enter each item using the keyboard displayed on the screen, and then select [Save].
For more information on the setting items, refer to "Specifying a Destination (Specifying a Destination PC Using the Screen
Keyboard)" (P.299).
5 Select [Next].
Note •To return to the previous screen, select the [Back] button.
6 Select [Name], enter a name using the
keyboard displayed on the screen, and then
select [Save].
For information on how to enter characters, refer to "Entering
Text" (P.70).
7 When you change the index, select [Index], select a new character from the keyboard
displayed on the screen, and then select [Save].
You can register a single alphanumeric index character for use as a keyword to search with
the Address Book.
For information on how to enter characters, refer to "Entering Text" (P.70).
8 When you change the address number, select [Change], select a number from the list, and
then select [Save].
9 Select [Next].
Note •To return to the previous screen, select the [Back] button.
To Next Page
Loading...
Need help?
General
