Inserting a USB Memory Device
377
Media Print (Text and Photos)
9
When the [Media Print - Photos] Screen Appears
1 Select a feature on the [Media Print - Photos] screen.
When the Screen Display Does Not Change
1 If any screen other than the [Services Home]
screen is displayed, press the <Services Home>
button
2 Select [Media Print - Text] or [Media Print -
Photos] on the [Services Home] screen.
3 The [Media Print - Text] screen or the [Media
Print - Photos] screen appears.
Important • Data stored in a USB memory device may be lost or damaged in the following cases. Make sure to
back up data in media before use.
- When disconnecting/connecting the USB memory device by methods other than described in this
guide.
- When receiving the effect of electrical noise or an electrical discharge
- When a fault or failure occurs during operation
- If the USB memory device receives mechanical damage
• We assume no responsibility for any direct and indirect damages arising from or caused by such
data loss.
Note •If you do not specify the file storage location, the scanned data is saved in the root directory.
To Next Page
Loading...
Need help?
General
