2 Product Overview
64
Product Overview
2
24 Embedded IC Card Reader
(optional)
Used to authenticate a user using a smart card.
When you touch the smart card to the IC Card Reader, the machine reads
the user information registered on the smart card and authenticates the
user.
Note • An optional component is required to use this feature. For more
information, contact our Customer Support Center.
• When the machine is in the Energy Saver mode, touching the smart card
to the IC Card Reader deactivates the Low Power mode. However, this
operation does not deactivate the Sleep mode. For more information,
refer to "Energy Saver Mode" (P.57).
25 Paper clip tray Used for placing paper clips and staples.
No. Component Function
To Next Page
Loading...
