3 Copy
84
Copy
3
2 Select a paper tray to be used.
îš„ Auto Select
Automatically determines the tray holding the appropriate paper, based on the document
size and the specified copy ratio.
Note •If you select [Auto Select], an option other than [Auto %] is selected in [Reduce/Enlarge].
îš„ Trays 1 to 4, or Trays 1 and 2
Allows you to directly select the desired tray.
Note •Trays 3 and 4 are optional for some models.
• When the Envelope Tray (optional) is inserted into the slot for Tray 1, you can load envelopes in the
tray. For more information, refer to "Paper Supply (Selecting the Paper for Copying)" (P.92).
îš„ Tray 5 Bypass Auto Detect
Automatically detects the size of paper loaded in the bypass tray.
Checking the Remaining Amount of Paper in a Tray
The icon displayed in a tray allows you to check the remaining amount of paper loaded in
the tray.
: Indicates that the remaining amount of paper is 25 to 100%.
: Indicates that the remaining amount of paper is 25% or less.
: Indicates that the tray runs out of paper, or no paper is loaded in the tray.
You can view the icons to check the
remaining amount of paper in a tray.
To Next Page
Loading...
Need help?
General
