Copy
93
Copy
3
[Paper Supply] Screen
This screen allows you to select a paper tray from all trays available on the machine.
1 Select a paper tray.
îš„ Tray
Allows you to select a paper tray. When [Tray] is selected, the [Tray 5] screen is displayed
where you can specify a paper type other than plain paper, and non-standard size paper.
Note •Trays 3 and 4 are optional for some models.
For more information, refer to "[Tray 5] Screen" (P.94).
When the Envelope Tray (optional) is inserted into the slot for Tray 1, you can load
envelopes in the tray. To use the Envelope Tray, prior settings are required in the System
Administration mode.
For information on the settings to use the Envelope Tray, refer to "5 Tools" > "Common Service Settings" > "Other Settings"
> "Tray 1 Configuration" and "Common Service Settings" > "Paper Tray Settings" > "Paper Tray Attributes" in the
Administrator Guide.
For information on envelope sizes that can be loaded in the Envelope Tray, refer to "5 Tools" > "Common Service Settings" >
"Other Settings" > "Paper Size Settings" in the Administrator Guide.
Note •The Envelope Tray can only be used in place of Tray 1. The standard Tray 1 cannot be used when
the Envelope Tray is used.
îš„ % Full
Displays the remaining amounts of paper loaded in trays.
îš„ Size
Displays paper sizes.
îš„ Type
Displays paper types.
îš„ Color
Displays paper colors.
For information on how to set [Paper Color], refer to "5 Tools" > "Common Service Settings" > "Paper Tray Settings" > "Paper
Tray Attributes" in the Administrator Guide.
îš„ Size Detection
Displays how the machine detects a paper size.
For information on how to set [Size Detection], refer to "5 Tools" > "Common Service Settings" > "Other Settings" > "Paper
Size Settings" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
