5.5 Replacing Consumables
144
Maintenance
5
5
Cover the top of the waste toner con-
tainer with the supplied orange vinyl
cap to prevent toner from spilling out.
6
Hold the used waste toner container
firmly with both hands and lift it into the
empty box.
The <L> and <R> on the empty box means left- and
right-hand sides. The used bottle cannot be inserted in
the reverse direction.
Return used waste toner containers to our Customer
Support Center for disposal.
7
Remove the supplied cleaning rod from
the box. Gently insert the cleaning rod
into each of the cleaning slots D1 to D4
(square holes) with the pad facing
down.
8
When the cleaning rod is inserted as far
as it will go, gently pull it out towards
you. Clean each of the four holes.
●
Make sure to insert the cleaning rod as far as it will
go.
●
It is almost impossible to see dirt on the pad.
Never put toner, a waste toner con-
tainer, or a container containing toner
in a fire. Toner dust may explode,
resulting in burns.
To Next Page
Loading...
Need help?
General
