5.6 Printing Report/List
159
Maintenance
5
016-705 Cause: Secure print document cannot be registered, as
extension hard disc is not installed.
Action: The extension hard disc is required for using the
secure print function.
“4.8 Printing Confidential Documents/Printing after
Checking the Printout (Secure/Sample Print)”(P.68)
116-701 Cause: 2 sided print cannot be done, as the memory is
insufficient.
Action: It is recommended to increase the memory
capacity.
116-702 Cause: Alternative font is used for printing.
Action: Check the print data.
116-703 Cause: An error occurred in PostScript (optional).
Action: Action: Check the print data or set bidirectional
communication to off using spool setting of
<Advanced> tab of the print driver.
116-710 Cause: It is possible that document size judgment is
incorrect, as receive data exceeds the HP-GL, HP-
GL/2 (optional) spool size.
Action: It is recommended to increase the allocated HP-GL
or HPGL/2 auto layout memory or install the
extension hard disc.
116-711 Cause: The specified size and orientation of PCL form do
not match the print paper.
Action: Correct the paper size and orientation according to
specified PCL form and then retry.
116-712 Cause: The form cannot be registered, as PCL form
memory is insufficient.
Action: Delete unnecessary forms and increase the PCL
form memory capacity.
116-714 Cause: An HP-GL or HP-GL/2 (optional) command error
occurred.
Action: Check the print data.
116-715 Cause: The form cannot be registered, as the upper limit of
PCL form registration has reached.
Action: Delete unnecessary forms.
Error message Cause and Action
To Next Page
Loading...
Need help?
General
