6.5 List of Messages
244
Troubleshooting
6
016‑504
[Cause] POP3 server name is not set correctly in [POP before SMTP]
That is performed when mail is set.
[Action] Check if the POP3 server is set up correctly with CentreWare
Internet Services. Also, check the settings for the DNS server.
“4.14.1 Setting up the Environment for E-mail Printing”(P.93)
016‑505
[Cause] Login to the POP3 server failed in [POP3 before SMTP] that is
performed when mail is sent.
[Action] Check if the user name and password used by POP3 are correct
with CentreWare Internet services.
“4.14.1 Setting up the Environment for E-mail Printing”(P.93)
016‑701
[Cause] PCL print data cannot be processed because the available mem-
ory is insufficient.
[Action] If the [Print Mode] is set to [High Resolution], set it to [High Qual-
ity]. If the status is still not improved, set it to [Standard].
“4.10 Setting Print Modes”(P.76)
016‑702
[Cause] PCL print data cannot be processed because the print page
buffer is insufficient.
[Action] Take one of the following actions:
●
If [Print Mode] is set to [High Resolution], set it to [High Quality].
If the status is still not improved, set it to [Standard].
●
Use Print Page Mode.
●
Increase the print page buffer capacity.
●
Add memory.
For information about [Print Mode], print page mode, and pint page
buffer, refer to "4.10 Setting Print Modes" (p.79), "4.2 Setting the Print
Function" (P.47), and "1.5 About Allocation of Memories" (P.20),
respectively.
016‑703
[Cause] Delayed Print job cannot be processed because no internal hard
disk (optional) is installed.
[Action] To use the Delayed Print feature, you need to install the internal
hard disk (optional).
If the internal hard disk is not installed, on the print driver property
screen, set [Hard Disk] to [Not Available] in the [Options] tab.
If the Delayed Print job fails even though the internal hard disk is
installed, contact our Customer Support Center.
Error code Cause/action
To Next Page
Loading...
Need help?
General
