6.5 List of Messages
245
Troubleshooting
6
016‑705
[Cause] Secure Print document cannot be registered because no internal
hard disk (optional) is installed.
[Action] To use the Secure Print feature, you need to install the internal
hard disk (optional).
“4.8 Printing Confidential Documents/Printing after Checking the
Printout (Secure/Sample Print)”(P.68)
016‑706
[Cause]
The number of Secure/Sample Print users exceeds the upper limit.
[Action] Delete unnecessary documents/registered secure print users that
are saved in the printer, and try to print again.
016‑707
[Cause] Sample print document cannot be printed because no internal hard
disk (optional) is installed.
[Action] To use the Sample Print feature, you need to install internal hard
disk (optional).
016‑709
[Cause] An error occurred during PCL processing.
[Action] Try to print again.
016‑710
[Cause] Delayed Print document cannot be registered because no inter-
nal hard disk (optional) is installed.
[Action] To use the Delayed Print feature, you need to install the internal
hard disk (optional).
016‑716
[Cause] TIFF file cannot be spooled due to insufficient internal hard disk
capacity.
[Action] Install internal hard disk (optional) or delete unnecessary data on
the internal hard disk to free up space.
016‑718
[Cause] PCL print data cannot be processed because the memory space
is insufficient.
[Action] If [Print Mode] is set to [High Resolution], change it to [High Qual-
ity] and try to print again. If the status is still not improved, set
[Print Mode] to [Standard] and print the job again.
“4.10 Setting Print Modes”(P.76)
016‑719
[Cause] PCL print data cannot be processed because the available mem-
ory space is insufficient.
[Action] Install additional memory to increase the available memory
space.
If printing fails still after memory addition, change the print driver set-
ting.
016‑720
[Cause] Detected an unsupported PCL command.
[Action] Check the print data.
Error code Cause/action
To Next Page
Loading...
Need help?
General
