Chapter 3 Component Status
3.3 Frontend Enclosure
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
100
3.3 Frontend Enclosure
The Frontend Enclosure (FE) information is displayed.
This function is displayed for the ETERNUS DX8700 S3/DX8900 S3.
■ Summary
The following items are displayed in the Main area:
• Location
The installation location of the thermal sensor is displayed.
- Intake Temp
- Exhaust Temp
• Status
The thermal sensor status is displayed.
• Error Code
The error code of the thermal sensor is displayed.
• Sensor 1
For the "Intake Temp" field, temperature of the SVC#0 is displayed in Celsius (C) and in Fahrenheit (F).
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is
displayed.
For the "Exhaust Temp" field, a "-" (hyphen) is usually displayed.
• Sensor 2
For the "Intake Temp" field, temperature of the SVC#1 is displayed in Celsius (C) and in Fahrenheit (F).
If the thermal information is not available due to problem such as a sensor failure, a "-" (hyphen) is
displayed.
For the "Exhaust Temp" field, a "-" (hyphen) is usually displayed.
To Next Page
Loading...
