Fujitsu ETERNUS DX8100 S3 - Controller Module

Chapter 3 Component Status
3.2 Controller Enclosure
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
82
3.2.1 Controller Module
The CM information is displayed.
■ For the ETERNUS DX8700 S3/DX8900 S3
■ For the other models
The following items are displayed in the Main area:
• Enclosure
The CE number is displayed. By clicking this item, the [Controller Enclosure Detail] screen is displayed.
Refer to "3.6 Controller Enclosure Detail" (page 117)
for display items.
This item is displayed for the ETERNUS DX8700 S3/DX8900 S3.
• CM
The CM number is displayed. By clicking this item, the [Controller Module] screen is displayed. Refer to "3.7
Controller Module Detail" (page 127) for display items.