Chapter 4 Volume Status
4.16 Volume Detail (Snapshot)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
236
4.16 Volume Detail (Snapshot)
The detailed information of the Snapshot is displayed.
This screen is displayed only for NAS user volumes (volumes of which the "Usage Details" are "NAS Data").
The following items are displayed in the Main area:
● Volume Information
• Status
The NAS user volume status is displayed.
Refer to "A.2 Volume Status" (page 406)
for detailed information of volume status.
• Capacity
The NAS user volume capacity is displayed.
• Usage Details
The usage details of the NAS user volume are displayed.
• Snapshot
The Snapshot information is displayed.
- Mode
The collection mode for the Snapshot is displayed.
If the Snapshot is not set, a "-" (hyphen) is displayed.
• Automatic
The Snapshot is set from ETERNUS Web GUI, ETERNUS CLI, or ETERNUS SF Storage Cruiser.
• Manual
The Snapshot is set from VMware vSphere Web Client.
Refer to "ETERNUS vCenter Plug-in 3.0.0 User's Guide" for details.
- Schedule
Status of the scheduled operation for Snapshot is displayed.
If the Snapshot is not set or if the collection mode (or the "Mode" setting) for Snapshot is set to
"Manual", a "-" (hyphen) is displayed.
• Active
• Inactive
To Next Page
Loading...
