Fujitsu ETERNUS DX8100 S3 - LUN Group: LU Qos Group Detail

Chapter 5 Connectivity Status
5.7 Host-LU QoS
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
280
5.7.2 LUN Group : LU QoS Group Detail
The bandwidth limit for each LUN is displayed.
The following items are displayed in the Main area:
• LUN Group
The LUN group name is displayed. If the ETERNUS CLI command ("set mapping") is used for LUN mapping,
a "-" (hyphen) is displayed.
• LU QoS Group No.
The LU QoS group number is displayed between 0 and 1055. If a LU QoS group number is not configured, a
"-" (hyphen) is displayed.
• Host LUN
The host LUN number is displayed.
• Name
The volume name is displayed.
• Bandwidth Limit
The maximum performance is displayed in IOPS (throughput value). If the bandwidth limit has not been
configured (the bandwidth has not been limited), "Unlimited" is displayed.