Chapter 2 System Status
2.8 Audit Log
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
61
2.8 Audit Log
This function displays the audit log information.
An audit log records not only operations that are performed by a user, but also how the ETERNUS DX/AF
operates for these operations. The audit log function that is provided with the ETERNUS DX/AF transfers the
following information to external servers; when an operation is performed, who performed the operation,
where the operation was performed, the details of the operation, and the results of the operation.
The following items are displayed in the Main area:
• Audit Log
Whether the audit log function is enabled or disabled is displayed.
When the procedure in "Enable Audit Log" in "ETERNUS Web GUI User’s Guide (Settings)" is executed,
"Enable" is displayed for "Audit Log" in the "Audit Log Information" field even if an external server is not
specified. Specify the external server to which the audit log is sent. Refer to "Setup Audit Log" in "ETERNUS
Web GUI User’s Guide (Settings)" for details.
Except for the functions that are listed below, the audit log collects all of the information for operations
(including logging in and logging out) that are performed via ETERNUS Web GUI and ETERNUS CLI (including
when the interface is "SOFT" (*1)).
• Export Cache Parameters
• Export Performance Information
• Send SNMP Trap Test
• Create Key/CSR
• Download Template File for Storage Migration Settings
• Backup Configuration
• Get G-List (*2)
• All of the display functions (e.g. displaying the volume list or displaying of the RAID group list)
*1: Refer to "2.1 System (Basic Information)" (page 36) for details.
*2: Operations that can be performed when logged in using a user account with the "Maintenance Operation" policy.
To Next Page
Loading...
