Fujitsu ETERNUS DX8100 S3 - Advanced Copy (Extent Information)

Chapter 8 Advanced Copy Status
8.9 Advanced Copy (Extent information)
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
400
8.9 Advanced Copy (Extent information)
Detailed information (Extent information) about the Advanced Copy is displayed.
This screen is available only when the "Copy Range" is "Extent".
The following items are displayed in the Main area:
• Offset
The array number of extent information is displayed.
• Source LBA
The copy source start Logical Block Address (LBA) of copy with range specification is displayed.
• Destination LBA
The copy destination start LBA of copy with range specification is displayed.
• Copy Extent Size
The data amount for copy with range specification is displayed.