Fujitsu ETERNUS DX8100 S3 - Key Management

Chapter 2 System Status
2.4 Key Management
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
53
2.4 Key Management
This function displays the setting parameters for the key server.
In this section, the SED authentication key is referred to as "key".
The following items are displayed in the Main area:
● Key Management Machine Name
• Key Management Machine Name
The name of the device that is connected to the key server is displayed. If the key management device
name is not specified, the field is blank.
● Key Server
• Server ID
The key server ID is displayed.
• Domain Name / IP Address
The domain name (Fully Qualified Domain Name: FQDN) or the IP address for the key server is displayed.
Note that the IPv6 address is displayed as an abbreviation. Refer to "IPv6 Address Notation" (page 253)
for
details.
• Port No.
The port number that is used to communicate with the key server is displayed.
• LAN Port
The LAN port that is used to communicate with the key server is displayed.
- MNT
- RMT
The ETERNUS DX60 S3 does not support the key management functions.